NOISE CONTROL SOLUTIONS FOR SCHOOLS, CLASSROOMS, GYMNASIUMS
willtec® Foam
||
Wall
Panels
||
Ceiling Tiles
willtec® foam can
control distracting sound reflections within classrooms, while a loaded
vinyl barrier installed between walls or in drop ceilings can keep
exterior sounds from migrating inside.
Walls or ceilings can
be treated with acoustic products
A Memtech professional support staff
can help to identify your noise problem and offer the right solution.
Solutions
for treating walls, ceilings or both with illbruck acoustical products
include:
Wall Panels
SONEX® wall
panels in willtec foam are easily mounted to walls or partitions to reduce
overall noise and reverberation.
FABRITEC™ Panels
–
Fabric-covered acoustical foam panels absorb noise while blending onto a
room’s décor. Its tackable
surface is ideal for displaying student work.
FABRITEC™ Panels
are also
available in a perforated vinyl that can be wiped clean.
PROSPEC®
Barriers installed between walls stops noise coming from adjacent rooms or
hallways. The free-standing
vinyl barrier can be woven between staggered 2x4 studs.
Anti-microbial, flat
willtec panels installed in HVAC systems absorb noise caused by
reverberating metal.
Ceiling Baffles and
Ceiling Tiles
SONEX® Baffles
are ideal in gymnasiums, auditoriums and multi-purpose rooms where they
can hang from ceilings to reduce echo and reverberation.
PROSPEC®
Barriers installed between a suspended and permanent ceiling stops outside
noise from transmitting through the ceiling.
CONTOUR™
Ceiling Tiles for suspended ceilings make an attractive and effective
acoustical environment.
ASA Group Works to
Establish Minimum Classroom Noise Standards
Proposed standards for classroom acoustics are being developed by a work
group of the Acoustical Society of America (ASA), in conjunction with the
American National Standards Institute (ANSI).
The work group will
recommend that classroom noise not exceed 35 decibels.
Many American classrooms today can be as loud as 50 decibels. For satisfactory communication, speech should be 15 decibels
above background noise. The
group will also recommend that reverberation time not exceed 0.6 seconds.
If adopted, the new
standards could be incorporated into the Americans with Disabilities Act
(ADA).
For immediate service email
salesinfo@memtechacoustical.com
top
back to
Architectural Page
For immediate service email
salesinfo@memtechacoustical.com
|
